|
Specifications
- BTU/HR
- 70,000
- CFM - 2500
- AMP DRAW
HIGH - 22
- 12 VOLT
- WEIGHT
- 25.2 LBS (WITHOUT MOUNT BRACKETS)
- DIMENSIONS:
30 3/8" W x 3 3/8" H x 15" D
Features
- Two 11 "
diameter fans to cover a higher percentage of the coil, 307 sq. in.,
moving more air. The high performance motors are equipped with extended
life brush. The motor shafts are sealed to the case and the case is
sealed with Viton O-rings to provide superior water resistance.
- Dual 6mm
coil with reducing pass flow coil circuitry maximizes the refrigerant
heat rejection and provides superior sub-cooling.
- The unit
is fabricated from .100 aluminum for superior durability and resistance
to rust.
- Is normally
installed without the usual cutting of big holes in the skirt of the
vehicle creating an aesthetic improvement more attractive to your customer.
- With capacity just a little bit less than the 25031 or 25033 condensers, this model is significantly smaller due to the use of two 6mm coils.
| Parts
Listing |
| FAN |
18000003B
(2) |
| COIL |
11471728A |
This page designed
& developed by Digital Dezines
All Rights Reserved
Back
|